If you live somewhere where guns are hard to acquire usually people who deal in drugs know arms dealers.Other option is to buy guns part by part and assemble or if you have access the welding equipment and a grinder build one,plans are all over the net for the while

http://thehomegunsmith.com/

Speeding down highway on wet road and no brake 

Pretty much all .onion sites look like this,very basic

Re align and print again,use the same alignment from first page

The most awesome slap in history,that guy deserves a medal

Quote from: baby raper on November 13, 2014, 06:03:02 pm

You should be printing ontop of bleached ones and fives.I forget involves degreaser tho

I tried it it's too tedious and I can't stand the fumes.

The bleaching method involves too much time for little turn over....i advise you to look up Albert Talton and his method,which involved using two peices of news print printing both sides and sticking it together...in the middle security stips and watermarks  could be added...nowadays the hardest thing to reproduce in currency is hologram,uv ink and shifting ink..makes good research though

P.s. you need an older high res scanner

These are techniques to hide fingerprints where wearing gloves may arouse suspicion,attract unwanted attention and leave traceable evidence.Feel free to improve upon these methods.


1. Sanding - take a vibration sander with medium grit sand paper and slowly rub your fingers on the paper while moving the sander up and down.It will take time but will surely remove the prints

2. Beeswax - get some beeswax and melt it in a small container.allow the wax too cool a while,while it is the consistency of ketchup (not too liquid) use a small paintbrush and apply liberally to palm and fingers.Clean off excess and allow to dry.Apply  light coat of hair spray. Blistex lip balm works great

3. Brutal Skin Exfoliation -  get a container to fit both your hands(one liter of water),add warm water and  2 table spoons of sodium hydroxide or calcium oxide ,disolve and allow hands to soak for an hour.Remove and scrape hands with a blunt knife ,repeat as needed

4. Glue - Dust hands in baby powder .Apply a thin layer of superglue or spray adehesive to palm and fingers.Repeat

5. Fake print - Aqquire a plaster of paris mould of someones hands (pay hobo) Take cooking spray and apply light coat on mould.Get skin coloured liquid latex and apply 3 coats and allow to dry with 5 minutes intervals between each coat.Allow to cure and carefully remove and trim excess with sizzors.Take a spray adhesive and apply in side the copy of the mould and set hands carefully and firmly.Touch up with stage make up if necessary.You now have a hobos print.

Good luck

Wow thats a reaaally shitty bead lol. I see where it could come in handy but, fuck those welds are ugly

Nothing a grinder can't fix,whats important is the strength